Connecting the Mouse Cable
To use the remote control as a mouse, follow the steps below. You'll
use a different mouse cable, depending on whether your computer has
a round PS/2 mouse port or a flat USB port.
1. Connect one end of the appropriate mouse cable to the projector's
port or the USB port, as shown.
Mouse/Com
connecting PS/2 mouse cable
2. Disconnect your mouse from the port on the back of your
computer and replace it with the other end of the cable. (Your
computer's mouse will be disabled while you are using the remote
control as a mouse.)
connecting USB mouse cable
Appendix A: Connecting to Additional Equipment
109