Press the
button on top of the projector to select the
Source
correct source. (Allow a few seconds for the projector to sync up
after pressing the button.)
If you're using a PowerBook:
You may need to set up your system to display on the projector screen
as well as the LCD screen. Follow these steps:
1. From the Apple menu, select
Monitors and Sound.
2. Click the
Arrange
Click here
Drag one
monitor icon on
top of the other
3. Drag one monitor icon on top of the other.
If this option isn't available, you may need to select one of the
Simulscan resolution settings:
1. Click the
Monitor
Click here
2. Select a
Simulscan
the projector to sync up after making the selection.)
Control Panels
icon.
icon.
resolution as shown. (Allow a few seconds for
, then click
Select a
Simulscan
resolution
Using the Projector
23