Epson PowerLite 505c User Manual page 104

If you're using a PC laptop:
Hold down the
Fn
display on an external monitor. It may have an icon such as
, or it may be labelled
the projector to sync up after pressing it. Check your laptop's
manual or online help for details.
On most systems, the
screen and the projector, or display on both at the same time.
Depending on your computer's video card, you might need to use
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer's documentation or online help for details.
If you're using a PowerBook:
1. From the Apple menu, select
Monitors and Sound.
2. Click the
Arrange
3. Drag one monitor icon on top of the other. This lets you
display on the projector screen as well as the LCD screen.
4. If this option isn't available, click the
5. Select one of the listed
seconds for the projector to sync up after making the
selection.)
The message Not Supported is displayed.
Make sure your computer's resolution doesn't exceed UXGA
(1600 1200, for the PowerLite 715c) or SXGA (1280 1024, for the
PowerLite 505c), and the frequency is supported by the projector
(see page 124). If necessary, change your computer's resolution setting
as described on page 96.
key and press the function key that lets you
. Allow a few seconds for
CRT/LCD
key lets you toggle between the LCD
Control Panels
icon.
Monitor
resolutions. (Allow a few
Simulscan
, then click
icon.
Solving Problems
95