Using the Projector
26
Adjusting the Image Shape
If the projected image isn't square or has a "keystone" shape, do one or
more of the following:
If your image looks like
projector off to one side of the screen, at an angle. Move it directly
in front of the center of the screen, facing the screen squarely.
If your image looks like
the
button to correct the shape of the image. After
Keystone
correction, your image will be slightly smaller.
You can also perform electronic keystone correction using the
projector's Setting menu. See page 79.
or
, you've placed the
or
, press the
+
Keystone button
or
side of
—