Projecting Component Video Images - Epson EMP-30 Setup Manual

Projecting Component Video Images

If the shape of the connector for the accessory or optional component
video cable for the video equipment is a 3RCA male connector
Red
Blue
Green
After projection starts, change the "Input Signal" setting in the "Video"
menu to either "YCbCr" or "YPbPr" to match the signals from the video
equipment.
If more than one external component is connected to the projector,
use the [Source] button on the projector's control panel or the
[Computer] button on the remote control to set the input source to
"YCbCr " or "YPbPr ", depending on the type of signal being input.
("Turning On the Projector" in User's Guide )
6
To component video
cable connector
Component video cable
(accessory)
("Video" menu in User's Guide )
To Computer/Component Video port (blue)