Installing Easymp; System Requirements; Installing The Software - Epson PowerLite 505c User Manual

Installing EasyMP

You must install the software to use the EasyMP features. Before you
install EasyMP, make sure the computer you use meets the
requirements listed below:

System Requirements

®
IBM compatible with at least a Pentium
(Pentium II 300 MHz or higher recommended)
®
Microsoft Windows 95/98/Me, Windows NT 4.0, or Windows
2000 (USB feature not available with Windows 95 or Windows
NT 4.0)
At least 32MB of RAM (96MB or more recommended)
At least 12MB of free hard disk space
VGA (640 480) or better display adapter and monitor

Installing the Software

Locate the EasyMP Software CD-ROM that came with your
projector and follow these steps to install the software.
1. Insert the EasyMP Software CD-ROM in your drive. The setup
program starts automatically.
If it doesn't start automatically, double-click
double-click the
.
setup.exe
2. Select your language and click
3. Follow the instructions on the screen to accept the license
agreement and install the software.
4. When you see the Setup Complete message, click
your computer, then click
Once EasyMP is installed, you see the
your desktop.
®
icon, then double-click
EasyMP
.
OK
Finish.
EMP SlideMaker
166 MHz processor
My Computer,
to restart
Yes
icon on
Creating Presentations for Your Projector
43