Controlling The Picture And Sound; Switching Between Picture Sources; Adjusting The Volume - Epson PowerLite 505c User Manual

Power
Freeze
A/V Mute
R/C ON
E-Zoom
OFF
3
Enter
Esc
Select
computer
Menu Help
Select
Comp EasyMP
EasyMP
S-Video Video
Auto Resize
Select video
P in P
source
- Volume +
Adjust
volume
Select S-video
source
Using the Remote Control
32

Controlling the Picture and Sound

You can use the remote control to select your source, adjust the
volume, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, or display a picture-in-picture video image.
Make sure you have set up your projector and connected any
equipment as described in Chapter 1 or Appendix A.

Switching Between Picture Sources

If you've connected your projector to a computer and/or video
sources, you can use the buttons on the remote control to switch
between the different sources.
Press the button to select your computer source.
Comp
Press the
EasyMP
stored on the memory card).
Press the button to select a standard composite video
Video
source.
Press the
S-Video
After you select a source, the screen goes dark for a moment before the
image appears.

Adjusting the Volume

If you've connected an audio source to the projector, you can adjust
the sound that's output through the projector's speakers.
To increase the volume, press on the right (
button.
To reduce the volume, press on the left (
button.
button to select EasyMP (for presentations
button to select an S-video source.
–
) side of the
+ Volume
) side of the
Volume