Displaying Each Slide Manually - Epson PowerLite 505c User Manual

Two types of icons appear on the screen:
EasyMP creates a folder for each scenario on the card.
Scenarios always have the .SIT file name extension.
3. Use the button on the remote control to highlight your
Enter
scenario file (SCN002.SIT, for example).
4. Press In a moment, your scenario begins. Each slide will
Enter.
display for 30 seconds (unless you have set slides to advance on
mouse click).
You can press
Enter
to display the previous slide.
Esc
5. To exit the scenario at any point, press the
remote control. You see a confirmation message.
6. Press to exit. In a moment, you return to the EasyMP main
Enter
screen.

Displaying Each Slide Manually

Even if your scenario is set to change slides automatically, you can still
change slides manually.
1. Press the
EasyMP
EasyMP main screen.
2. Use the button on the remote control to highlight the
Enter
folder icon for your scenario.
3. Press the button on the remote control to highlight the
Esc
icon.
Execute
4. Press to display the first slide in your scenario.
Enter
5. Continue pressing
Press to display the previous slide.
Esc
6. To exit the scenario at any point, press the
remote control. You see a confirmation message.
7. Press to exit. In a moment, you return to the EasyMP main
Enter
screen.
to display the next slide immediately, or press
button on the remote control to display the
to display each slide in sequence.
Enter
button on the
EasyMP
button on the
EasyMP
Presenting Without a Computer
note
You can modify your scenario
using EMP SlideMaker on
your computer. However, you
can also make certain types of
changes using EasyMP
without a computer.
57