List Of Network Settings; General Settings - Canon imagePROGRAF W2200S User Manual

List of Network Settings

If you are using a Web Browser (Remote UI), or FTP Client, you can use
these applications to change settings of the network interface board. The
settings that can be changed are listed in the tables below.
Note
z In the tables below, the information enclosed with parentheses denote items for
FTP Client. For example:
„ General Settings
Device Name
(DEVICE_NAME)
Location (SYS_LOC)
Administrator
(SYS_CONTACT)
Phone
(SYS_TEL_NUMBER)
Comment (E-mail)
(SYS_COMMENT)
Password
(ROOT_PWD)
User Permission
(USER_JOB_CONT)
E-Mail Retry
(EMAIL_RETRY)
Retry Interval
(EMAIL_DELAY)
To: Address
(EMAIL_ADDR)
Reply to: Address
(EMAIL_REPLY)
Timing of Notification
(EMAIL_NOTIFY)
• Device name (DEVICE_NAME):
"Device name" denotes the item for the Web Browser, and "DEVICE_NAME"
denotes the item in the Config file for FTP Client.
Item
Device name (Range: 0 to 32 chars.)
Device location (Range: 0 to 32 chars.)
Name of Administrator for the device (Range: 0
to 32 chars.)
Telephone number of the Administrator (Range:
0 to 32 chars.)
Administrator Comments (Range: 0 to 32 chars.)
Device password (Range: 0 to 15 chars.)
Determines whether a user has permission to
execute print jobs.
The maximum number of retries attempted after
failure of an e-mail transmission.
The time interval between retries after failure of
an e-mail transmission.
The addresses where e-mail notifications are
sent. (Address length: 0 to 128 chars.)
Maximum number of addresses: 2
The addresses where replies to e-mail
notifications are sent. (Address length: 0 to 128
chars.) Maximum number of addresses: 2
Determines the condition under which the e-mail
notification is sent. Max.: 2 allowed
Description
List of Network Settings
Initial Value
Blank
Blank
Blank
Blank
Blank
Blank
Off
0
5
Blank
Blank
All Off
7-3