Paper Not Aligned With Right Guide; Cannot Detect Papr; Paper Cutting Failed - Canon imagePROGRAF iPF750 MFP M40 User Manual

Paper not aligned with right guide.

When paper was loaded, it was not aligned with the guide
on the right side.

Cannot detect papr

Cause
The paper has come out of the printer.

Paper cutting failed.

Cause
There are sheets left on the
Ejection Guide.
There is a foreign object by
the Output Tray, obstruct-
ing the Cutter Unit.
You are not using the print-
er under the recommended
environmental conditions
for the paper.
You are using paper that is
not compatible with auto-
matic cutting.
iPF750
Cause
Follow these step to reload a sheet.
1. Remove the paper and press the OK button.
2. Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
Follow these step to reload a sheet.
1. Push the Release Lever back and remove the paper.
2. Pull the Release Lever forward.
3. Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
1. Push the Release Lever back and remove the paper.
2. Load the paper.
3. Pull the Release Lever forward.
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
1. Lift the Top Cover and remove the foreign object.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper are
met. Note that various environmental conditions are recommended for various types of
paper. For details on the recommended environmental conditions for paper, see Paper
Reference Guide."
(See Paper Reference Guide .)
1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")
Error Message
Corrective Action
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on the right.
Corrective Action
→P.602
→P.602
Corrective Action
→P.579
→P.594
> Messages regarding paper >
Paper not aligned with right guide.
12
819