Canon imagePROGRAF iPF750 MFP M40 User Manual page 697

Inter- TCP/I IPv4
face P
Setup
IPv6
Net- NetWare
Ware
Frame Type
Print Service
AppleTalk
Ether- Auto Detect
net
Driver
Comm.Mode
Ethernet Type
Spanning Tree
iPF750
Setting Item
IPv4 IP Address
Set-
Subnet Mask
tings
Default G/W
DNS DNS Dync update
Set-
tings
Pri. DNS
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name
DNS Domain
Name
IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS DNS
Set- Dync
tings update
Pri. DNS
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name
DNS Domain
Name
Description, Instructions
Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
Specify whether DNS server registration is updated
automatically.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
State- Specify whether DNS server registration is updated
full automatically.
Addr
State-
less
Addr
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To ap-
ply your changes, choose Register Setting.
Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic configuration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported
over the LAN.
Control Panel > Printer Menu >
Menu Settings
8
681