Canon imagePROGRAF iPF750 MFP M40 User Manual page 612

Handling Paper > Handling rolls
3.
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
5.
Press ▲ or ▼ to select Cutting Mode, and then press the OK button.
6.
Press ▲ or ▼ to select Eject, and then press the OK button.
7.
Starts printing.
When printing is finished, the printer will stop without cutting.
8.
Holding the printed document to prevent it from dropping, press the Cut button to cut the roll.
5
Manual (when using media that cannot be cut with the Cutter Unit)
1.
596
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab (
Specifying the Cutting Method for Rolls
>
).
iPF750