The Contrast Becomes Uneven During Printing; The Length Of Printed Images Is Inaccurate In The Feeding Direction; Images Are Printed Crooked - Canon imagePROGRAF iPF750 MFP M40 User Manual

Troubleshooting > Problems with the printing quality
The Printhead is set too high in the
Control Panel menu.
The type of paper specified in the
printer driver does not match the type
loaded in the printer.

The contrast becomes uneven during printing

The paper feed amount is out of adjust-
ment.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.

The length of printed images is inaccurate in the feeding direction

11
In the Control Panel menu, Adj. Priority
is set to Print Quality.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
792

Images are printed crooked

In the Control Panel menu, Skew Check Lv. is set to
Loose or Off.
The contrast becomes uneven during printing
>
Cause
(See "Troubleshooting Paper Abrasion and Blurry Images (Head
Height).")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you have
loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Cause
Cause
Set Adj. Priority to Print Length in the Control Panel menu, and then ex-
ecute Adjust Length.
(See "Adjusting the Feed Amount.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you
have loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Cause
Corrective Action
→P.626
Corrective Action
Adjust the feed amount.
(See "Adjusting the Feed Amount.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you
have loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Corrective Action
In the Control Panel menu, set Skew Check Lv. to Stand-
ard.
→P.579
→P.602
→P.628
→P.579
→P.602
→P.628
→P.579
→P.602
Corrective Action
iPF750