Canon imagePROGRAF iPF750 MFP M40 User Manual page 696

Control Panel > Printer Menu
GL2
Set-
tings
8
Inter-
680
face
Setup
Menu Settings
>
Setting Item
Line & Smoothing
Pen
Man-
ager
ThickenFineLines
AdjustFaintLines
Proces- Warning
singOp-
tion
PageSizeProcess1
PageSizeProcess2
GL2 Set Print
EOP Timer
TCP/I IPv4 IPv4 Mode
P
Proto-
col
• If you choose Software
Operation is determined by the application. If noth-
ing is specified by the application, the result is as
shown in the figure.
Note: By default, this is a 72-sided figure
• If you choose Smooth
Select On to print fine lines more distinctly.
If fine lines are printed in colors that do not match the
colors of other shapes, selecting Off may help produce
the expected results. However, lines in some colors
may appear broken.
Select On to have any GL2-related warnings dis-
played.
Normally, the area available for printing excludes a
margin required by the printer, and images are posi-
tioned accordingly. Selecting On in this setting elimi-
nates any misalignment of the printing position if the
image itself includes a border.
Selecting On will determine the paper size based on
the image rendering area.
Print GL2 settings information.
Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
Choose whether the printer IP address is configured
automatically or a static IP address is entered manual-
ly.
DHCP Specify the protocol used to configure the IP address
automatically.
BOOTP
RARP
Description, Instructions
iPF750