Specifying Paper In The Printer Driver - Canon imagePROGRAF iPF750 MFP M40 User Manual

Mac OS X Software

Specifying Paper in the Printer Driver

If you have replaced the paper, you must complete the following settings in the printer driver.
1.
This sets the
4
2.
Select the printer in the
3.
Choose the original size in the
434
4.
If you configured the settings using the Page Attributes dialog box, click
select Print from the application software menu.
Specifying Paper in the Printer Driver
> Printer Driver >
B C
Format for and Paper Size.
Note
• The configuration method varies depending on the OS and application software you are using.
If Page Setup is displayed in the application menu, the settings are configured by opening the Page
Attributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed
when you select Print from the application software menu.
A
Printer list.
F
Paper Size list.
F
OK to close the dialog box, and then
iPF750