Messages Regarding Hp-Gl/2; This Type Of Paper Is Not Compatible With Hp-Gl/2; Gl2: W0502 The Parameter Is Out Of Range; Gl2: W0504 This Command Is Not Supported - Canon imagePROGRAF iPF750 MFP M40 User Manual

Error Message >

Messages regarding HP-GL/2

Messages regarding HP-GL/2

This type of paper is not compatible with HP-GL/2. ....................................................................................... 830

GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) ...................................................................... 830

GL2: W0502 The parameter is out of range. ................................................................................................... 830

GL2: W0504 This command is not supported. ............................................................................................... 830

This type of paper is not compatible with HP-GL/2.
The printer has received a HP-GL/2
print job that cannot be printed on the
paper that has been advanced.
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
Cause
The printer memory is
full.
GL2: W0502 The parameter is out of range.
12
A parameter specified in a HP-GL/2 command is out of the
supported range.
GL2: W0504 This command is not supported.
830
The printer has received an unsupported HP-GL/2 com-
mand.
This type of paper is not compatible with HP-GL/2.
>
Cause
Follow these steps to replace the type of paper in the printer.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Replace the paper with a type compatible with HP-GL/2. For details on pa-
per compatible with HP-GL/2, refer to the Paper Reference Guide. (See
"Types of Paper.")
Press ▲ or ▼ to select Print, and then press the OK button to resume print-
ing. However, note that this error may cause paper jams and affect the print-
ing quality.
Because the entire print job could not be received, the printer may not be able to print the
entire original. Check the printing results.
Cause
Cause
Corrective Action
→P.568
Corrective Action
Corrective Action
Check the print job.
If you have specified ProcessingOption > Warning
> On in the Control Panel menu, set it to Off in-
stead.
Corrective Action
Check the print job.
If you have specified ProcessingOption > Warning > On
in the Control Panel menu, set it to Off instead.
iPF750