Paper-Related Troubleshooting - Epson Stylus Pro GS6000 User Manual

EPSON Stylus Pro GS6000

Paper-related troubleshooting

Note:
If the paper is jammed or torn, see the following section to remove it.
"The paper is jammed" on page 81
The paper slips or is torn during initialization
Cause
Are you using the recommended
paper?
Is the loading position of the paper
correct?
Is the roll paper set correctly?
Are there any foreign materials such
as paper attached to the
pressurizing roller?
Is the printer being used in an
environment other than the one
specified, such as in direct sunlight?
Are you using folded, torn or rolled
paper?
Does the paper bend?
The paper is crumpled during initialization
Cause
Are you using the recommended
paper?
Is the loading position of the paper
correct?
Is the paper loaded at an angle?
Are there any foreign materials such
as paper attached to the
pressurizing roller?
Is the printer used in an environment
other than the one specified, such
as near an air conditioner?
Are you using folded, torn or rolled
paper?
User's Guide
Problem Solver
What to do
Use the recommended paper.
For details of the recommended paper, contact your local Epson
customer support.
Set the paper correctly.
See "Setting roll paper" on page 35
Set the roll paper correctly.
See "Loading roll paper" on page 32
Clean the pressurizing roller.
See "Cleaning inside of the printer" on page 69
Only use the printer in an environment that is specified for use.
Replace the paper.
See "Cautions on handling paper" on page 40
Use the recommended paper. When using paper other than the
dedicated one, set the Paper Suction in the Paper Setup menu.
For details of the recommended paper, contact your local Epson
customer support.
See "Details of PAPER SETUP" on page 21
What to do
Use the recommended paper. For details of the recommended
paper, contact your local Epson customer support.
Set the paper correctly.
See "Setting roll paper" on page 35
Set the paper straight.
See "Setting roll paper" on page 35
Clean the pressurizing roller.
See "Cleaning inside of the printer" on page 69
Only use the printer in an environment that is specified for use.
Replace the paper.
See "Cautions on handling paper" on page 40
77