Epson Stylus Pro GS6000 User Manual page 78

EPSON Stylus Pro GS6000
The wrong paper size is set during initialization
Cause
Are you using the recommended
paper?
Is the paper loaded at an angle?
When the paper is set, does it curl
upward?
Is the printer used in an environment
other than the one specified, such
as near an air conditioner?
Are you using paper that has been
printed on already?
Paper jams frequently occur
Note:
If paper other than the recommended one is used, correct paper feed adjustment cannot be assured.
Cause
Are you using the recommended
paper?
Is the paper used in an environment
other than the one specified?
Are you using old paper?
Are you using folded or wrinkled
paper?
Does the paper bend?
The paper veers during printing
Cause
Are you using the recommended
paper?
Is the loading position of the paper
correct?
Is the roll paper set correctly?
User's Guide
Problem Solver
What to do
Use the recommended paper.
For details of the recommended paper, contact your local Epson
customer support.
Set the paper straight.
See "Setting roll paper" on page 35
Straighten the paper or set a new paper.
See "Setting roll paper" on page 35
Only use the printer in an environment that is specified for use.
See "Loading roll paper" on page 32
Use a new paper.
See "Paper type" on page 40
What to do
Use the recommended paper.
For details of the recommended paper, contact your local Epson
customer support.
Use the paper in a dedicated environment.
See "Cautions on handling paper" on page 40
Replace it with new paper.
See "Replacing Roll Paper" on page 39
Use the recommended paper. When using paper other than the
dedicated one, set the Paper Suction in the Paper Setup menu.
For details of the recommended paper, contact your local Epson
customer support.
See "Details of PAPER SETUP" on page 21
What to do
Use the recommended paper.
For details of the recommended paper, contact your local Epson
customer support.
Set the paper correctly.
See "Setting roll paper" on page 35
Set the roll paper correctly.
See "Loading roll paper" on page 32
78