Epson Stylus Pro GS6000 User Manual page 58

EPSON Stylus Pro GS6000
D
Carefully pull the expended cartridge
straight out of the slot.
Warning:
w
If ink gets on your hands, wash them
thoroughly with soap and water. If ink
gets into your eyes, flush them
immediately with water.
E
Make sure the replacement ink cartridge is
the correct color. Shake an ink cartridge
horizontally well (about 5 seconds) before
installing it for best results. Then, remove it
from the package.
Caution:
c
Do not touch the green chip on the side of
the cartridge. Doing so may prevent
normal operation and printing.
User's Guide
Maintenance and Move or Transportation
58
F
Hold the ink cartridge with the arrow mark
facing up and pointing to the rear of the
printer, and then insert it gently into the
slot as far as it will go.
Make sure to match the ink cartridge color
with the color label on the slot.
Note:
Be sure to install all eight ink cartridges. You
cannot print if any of the ink cartridges is not
installed.
G
Close the ink compartment cover.