Epson Stylus Pro GS6000 User Manual page 76

EPSON Stylus Pro GS6000
Does not work after loading the paper
Cause
Is the front cover open or paper
lever raised?
Is the maintenance cover open?
Is the paper loaded at an angle?
Is the ink cartridge inserted?
Are you using the recommended
paper?
Is the printer being used in an
environment other than the one
specified, such as in direct sunlight?
When data is sent from the computer, an error occurs at the printer and nothing is printed
Cause
Is the type of printer selected
correctly at the computer?
Are the interface requirements and
command mode the same on the
computer side and printer side?
Cannot use the computer online using LAN
Cause
Is the network interface cable
connected correctly?
Are the network settings configured
correctly?
Match the printer's network settings
with the computer side
environment.
Does the Power light on the LCD
panel flash after sending printing
data from the computer?
User's Guide
Problem Solver
What to do
Close the front cover.
Lower the paper lever.
See "Setting roll paper" on page 35
Close the maintenance cover.
See "Cleaning the cleaning wiper" on page 60
See "Cleaning around the print head" on page 62
Load the paper straight.
See "Setting roll paper" on page 35
Insert the ink cartridge.
See "Replacing ink cartridges" on page 57
Use the recommended paper.
For details of the recommended paper, contact your local Epson
customer support.
Only use the printer in an environment that is specified for use.
See Unpacking and Setup Guide
What to do
Check that the printer type settings on the computer side and printer
side are the same.
What to do
Confirm the types of the cross and straight cables, and connect the
network interface cable correctly.
See Unpacking and Setup Guide
Configure the network settings correctly.
See "NETWORK SETUP" on page 26
Match this product's network settings with the computer side
environment.
See "System Requirements" on page 88
If the Power light does not flash, contact the computer
manufacturer.
76