Handling Waste Ink; Choosing A Place For The Printer - Epson Stylus Pro GS6000 User Manual

EPSON Stylus Pro GS6000

Handling waste ink

Observe the following when handling the waste
ink:
❏ Before using this product, please be sure to
read the Material Safety Data Sheet (MSDS).
You can download it at your local Epson Web
site.
❏ The waste ink from the printer is industrial
waste. Proper waste ink disposal in
compliance with the industrial waste disposal
laws and ordinances of your local
government is required. Consign disposal of
waste inks to an industrial waste disposer. At
this point, please provide the Waste Ink Data
Sheet to the industrial waste disposer. You
can download it at your local Epson Web site.
❏ The workplace should be free from open
flame and well ventilated.
❏ Please handle the ink with care to avoid
having the ink come into contact with your
skin, eyes, and clothing, also to avoid
accidental ingestion.
Be careful not to inhale the vapors.
❏ Please wear a protective mask, eyewear,
gloves, long sleeves and long trousers to
avoid contact with the ink during the
operation.
❏ Work clothes that become soiled with the ink
should be thoroughly cleaned.
❏ Please wash your hands and gargle well after
disposing of the ink.
❏ Do not bring food near the waste ink.
❏ Please store out of reach of children.
User's Guide
Safety Instructions
6
Emergency Measures
❏ If ink sticks to your skin, wash well with
plenty of soapy water. Consult your doctor if
your skin feels irritated or is discolored.
❏ If it gets in your eyes, flush them immediately
with plenty of tap water and see a doctor as
soon as possible.
❏ If accidentally swallowed, do not vomit.
Consult a doctor as soon as possible.
❏ If you inhaled the vapor, move to clean air
and consult a doctor if you feel dizzy or
nauseous.
❏ If breathing has stopped, perform artificial
respiration immediately, and call for
emergency medical service.
❏ If spilled from the container, remove heat
sources, sparks and flame first, then wipe up
with a cloth. Used cloths containing ink
should be soaked in water until disposal.
Choosing a place for the
printer
Observe the following when choosing a place for
the printer:
❏ Place the printer on a flat, stable surface that
extends beyond the base of the printer in all
directions. The printer will not operate
properly if it is tilted or at an angle.
❏ Avoid places subject to rapid changes in
temperature and humidity. Also, keep the
printer away from direct sunlight, strong
light, heat sources, or air conditioner.
❏ Avoid places subject to dust, shocks, or
vibrations.
❏ Leave enough room around the printer to
allow for sufficient ventilation.
❏ Place the printer near a wall outlet where the
power plug can be easily unplugged.