Shop fox W1811 Owner's Manual page 27

Install the riving knife as shown in
not tighten the mounting bolt yet.
Adjust the riving knife approximately
the main blade, using a
guide ( ), and make sure the top of the riv-
ing knife is positioned below the blade's highest point
of rotation, as shown in
Use a straightedge to make sure the riving knife and
scoring blade are aligned with the main blade.
— The riving knife position can be modified slightly
by shimming. Refer to
— The scoring blade alignment can be changed by
adjusting the set screws accessible through the
table top (see
, but do
1
⁄ " away from
8
1
⁄ " or 3mm hex wrench as a
8
on .
for more details.
or refer to ).
-25-
Installing riving knife.
Adjusting the riving knife
spacing.
Scoring Blade Elevation
Scoring Controls Lock
Scoring Blade
Alignment
Access holes for scoring blade
adjustment controls.