Feed the lifting straps around the lifting bolts on the
back of the table and the sliding table saw mounts
on the front of the cabinet (see
). Attach
the ends of the lifting straps to the forklift forks.
Lift the table saw cabinet and move it to your pre-
determined location.
Remove the red lifting bolts from the back of the
table.
Lifting the table saw.
Place a level on the cast iron table to level the table
saw cabinet side-to-side and front-to-back. This will
allow the table to slide smoothly.
Hex bolt in stand corners for
leveling; the hex nut is used to secure the
bolt position.
-17-