Shop fox W1811 Owner's Manual page 21

Mount the rip fence scale to the large extension
table and cast iron table ( ) using three
M6-1 hex nuts, 6mm lock washers, 6mm flat wash-
ers, two M6-1 x 16 hex bolts, and one M6-1 x 25 hex
bolt. (The longer hex bolt is used in the cast iron
table.) Adjust the scale even with the table tops,
then tighten the fasteners.
Mounting rip fence scale.
Mount the rip fence rail as shown in . Make
sure the black tab is toward the back end of the
Black Tab
saw. Adjust the hex nuts so the gap between the rail
and tables is even, but leave the rail slightly loose
for now.
Rip fence rail mounting.
-19-