Adjust Lever Settings (Pg Adjust Lever) - Epson Stylus Photo Service Manual

EPSON Stylus Photo

1.2.3 Adjust Lever Settings (PG adjust lever)

The adjust lever located on the right side(blue) that is under the printer cover needs to be set to the proper
position according to the paper you print. (Refer to the table below). Also, if there is any dirt caused by
friction on the wavy or wrinkled paper, this can be prevented by changing the lever position to rear
position (marked with "+") in spite of paper types.
Paper
Normal paper,
Coated paper
Envelopes
Rev.A
Table 1-4. Adjust Lever Settings
Lever position
Front (0) 0 mm (1.04mm between head and paper feed
Rear(+)
Figure 1-2. Adjust Lever
PG adjustment value
assembly)
0.9 mm (1.94mm between head and paper
feed assembly)
1-5