Adjust Lever Setting (Pg Adjust Lever) - Epson Stylus COLOR 440 Service Manual

EPSON Stylus COLOR 440, 640, and 740
Envelopes
Table 1-6 and Figure 1-5 show the printable area for envelopes.
Table 1-6. Printable Area for Envelopes
Envelope LM (Minimum RM (Minimum
Size Left Margin) Right Margin)
#10 0.12" (3 mm) 1.10" (28 mm)
DL 0.12" (3 mm) 0.28" (7 mm)
C6 0.12" (3 mm) 0.12" (3 mm)
LM
Figure 1-5. Printable Area for Envelopes
TM (Minimum BM (Minimum
Top Margin) Bottom Margin)
0.54" (14 mm)
0.12" (3 mm)
0.12" (3 mm)
0.54" (14 mm)
0.12" (3 mm)
0.12" (3 mm)
0.54" (14 mm)
0.12" (3 mm)
0.12" (3 mm)
RM
Printable
Area

1.2.3.1 Adjust Lever Setting (PG Adjust Lever)

The adjust lever (blue) on the right side under the printer cover needs to
be set to the proper position for the paper you print on. (See Table 1-7.)
If you find that the paper wrinkles during printing, or if smudges appear
on the paper, move the lever to the + position (toward the rear),
regardless of paper type.
Lever Position
Plus position
Zero position
NOTE: Always return the adjust lever to the zero position after you
finish printing. Leaving the lever in the plus position may cause
poor printing in the next printout.
TM
BM
Chapter 1 Product Description
Table 1-7. Adjust Lever Setting
Clearance between head and platen
1.04 mm
1.74 mm (+0.7 mm)
12