Printing Jobs From A Virtual Mail Box; Quick Copy; Printing A Quick Copy Job - Kyocera TASKalfa 181 User Manual

4

Printing Jobs from a Virtual Mail Box

1
2
3
4
5
6
7

Quick Copy

Printing a Quick Copy Job

1
2
KX DRIVER
appears. If Virtual mail box is used repeatedly, this option lets you select
trays easily without opening the Job tab for every print job.
Click OK in all dialog boxes.
You can print all accumulated jobs from a Virtual mail box.
At the printing system's operation panel, press the Print key.
Press the up or down key to select MENU, then press the OK key.
Press the up or down key to select e-MPS.
Press the up or down key to select Print VMB Data, then press the OK key.
Press the up or down key to select the desired mailbox.
If prompted, use the numeric keypad to enter the five-digit access code.
Press the OK key to print.
Quick copy is a Job storage (e-MPS) option that prints all copies of a print job
and stores the job temporarily on the hard disk for reprinting later. This feature is
available when a hard disk is installed and selected in the Device Settings tab.
Quick copy is useful for printing the job again later in the day when you need
additional copies at short notice. You can set the number of additional copies
and print the job from the printing system's operation panel without sending the
job again from the computer.
The number of Quick copy or Proof and hold jobs that can be stored is set at
the printing system's operation panel, to a maximum of 50 jobs. When the
designated number of jobs is reached, older jobs are replaced by new jobs. All
Quick copy jobs are stored on the hard disk after printing but are deleted when
the printing system is turned off. You can manually delete a job at the operation
panel.
Warning: A print job can replace a job on the hard disk having the same User
name and Job name. To prevent this, select Use job name + date and time
under Overwrite job name.
With a hard disk installed, Quick copy lets you print a document and save it in
the printing system until the job is manually deleted or the printing system is
turned off.
In the Job tab, select Job storage (e-MPS).
Select Quick copy.
Job
9-4