Editing A Prologue/Epilogue File; Deleting A Prologue/Epilogue File; Assigning A Prologue/Epilogue File; Unassigning A Prologue/Epilogue File - Kyocera TASKalfa 181 User Manual

Editing a Prologue/Epilogue File

1
2
3

Deleting a Prologue/Epilogue File

1
2

Assigning a Prologue/Epilogue File

1
2

Unassigning a Prologue/Epilogue File

1
2

Specifying the Insertion Point

KX DRIVER
In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file to insert
into the print job. (If no file names are visible in the list, you must click Add to
browse for files on your computer or network to add to the list.) After the file is
selected, insertion point options will be enabled.
In the Prologue/Epilogue dialog box, select a command file name from the list,
and then click Edit. Microsoft Notepad opens for editing the text file.
Make your changes to the file.
Save the file, and exit Microsoft Notepad.
Note: Editing and saving a command file overwrites the contents of the
existing local or network file.
In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file name
from the list, and then click Delete.
In the delete confirmation box, click Yes to accept.
Note: Only the file name is removed from the command file list. The file itself
is not deleted, but remains on the network or local computer.
In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file name
from the list.
Under Insertion Point, select a place to insert the Prologue/Epilogue file.
When you designate a Prologue/Epilogue file as unassigned, you are
removing it from the print job. It remains in the list. Unassigned selections are
useful when the list contains several Prologue/Epilogue files, and you want to
use some but not others.
In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file name
from the list.
Under Insertion Point, select Unassigned.
The insertion point is the location in the print job where the selected
Prologue/Epilogue command file is processed by the printing system. Each file
in the list can be assigned only one insertion point.
Advanced
10-2