Kyocera TASKalfa 181 User Manual page 88

Print graphics as black
rather than grayscale. This feature is intended for CAD applications.
Print text as black
print jobs by reducing the amount of data sent to the printer. In black and white
printing, it increases the detail for light-colored text printed. White text and image
colors are unaffected.
Private print
four-digit access code is entered. Private print jobs are deleted when the printing
system is reset or turned off.
Profile
you can select a profile by name and apply its settings to a print job without selecting
each feature individually.
Prologue/Epilogue
specific locations in the print job. An advanced user may choose to use this feature to
embed a PRESCRIBE command that will call a macro to overlay PRESCRIBE form
data or a graphic object, such as a logo or a signature, at a specific point in the print
job.
Proof and hold
it before printing the remaining copies. This feature is available when a hard disk is
installed and selected in the Device Settings tab. After the proof copy is printed and
checked, remaining copies can be printed from the printing system's operation panel
without sending the job again from the computer.
Quick copy
Q
temporarily on a hard disk for reprinting later. This feature is available when a hard
disk is installed and selected in the Device Settings tab.
Quick Print tab
to set print options. You can choose basic settings or a predefined printer profile,
rather than having to go to various tabs. Quick Print settings can be captured in a
group called a profile. Profiles support common printing tasks, saving you from having
to repeatedly select the same settings. The Administrator can set the view of the Quick
Print tab through the Installation process, or Administrator Settings in Properties.
R Resolution
quality of detailed printed images.
Reverse
page to the first. This option is unavailable when Printer default is selected.
Separation
S
print job or copy is clearly distinguished from another.
SNMP
managing IP network devices, including printing devices. SNMP settings determine
the level of security when using the Auto Configure feature, and prevent unauthorized
printing to the SNMPv3 printing device. SNMP settings must be set in the
Administrator settings in the Device Settings tab, and in the printing system's
Command Center.
vii
This option prints all color graphics and text with black,
Prints all color text as black. It produces faster printing of color
Job option that saves print jobs on the hard disk for printing until a
A set of user defined driver settings that are saved as a group. Once saved,
Advanced feature that allows you to insert a macro into
Job option that prints one copy of a print job so that you can proof
Job option that prints all copies of a print job and stores the job
The Quick Print tab improves usability by providing an easier way
The number of dots printed in one inch. Higher resolution improves the
Print output option that sends a print job to a destination from the last
Finishing feature that stacks print jobs in an output tray so that one
Simple Network Management Protocol. The standard TCP/IP protocol for
User Guide