Troubleshooting - HP StorageWorks 1510i - Modular Smart Array User Manual

Be sure to record the controller firmware version and management port IP address.
information)
IMPORTANT:
Depending on the IP address automatically assigned to the MSA1510i, the
MSA and its storage may be inaccessible to the network. If needed, change
the IP address through the MSA controller LCD panel. For instructions, see
"Changing the management port IP address through the MSA1510i controller display

Troubleshooting

If the LED patterns in are not displayed, or the MSA Startup Complete message is not displayed:
• Check the cable connections to the MSA1510i.
• Check the availability of your power source.
• Review the setup instructions in previous sections of this guide.
• Remove and then reinsert the module.
• Refer to the HP StorageWorks MSA1510i maintenance and service guide.
1510i Modular Smart Array installation and user guide
(Basic MSA1510i
panel" on page 102.
57