Configure Storage Systems For Continuous Access Journal, Define Logical Paths - HP StorageWorks P9000 User Manual

Configure storage systems for Continuous Access Journal, define logical
paths
Prerequisite Information
This procedure must be performed on both primary and secondary systems.
The primary and secondary systems must already be configured for Continuous Access Journal
operations. See
The data path must be set up. See
The port attributes on the primary and secondary systems must be configured for Continuous
Access Journal. See
The system's serial number, SSID, and the CU will be required during this procedure.
To set up the Continuous Access Journal logical path(s)
1. In Remote Web Console, select Actions > Remote Copy > Continuous Access Journal > DKC
Operation. The DKC Operation window displays.
2. Click
3. In the Display box, select DKC. The tree and full list on the right-side display information about
all remote storage systems.
4. Locate the list on the right-side, right-click, and select DKC Operation > Add DKC. The Add
DKC dialog box is displayed.
"System requirements" (page 17)
"Define Fibre Channel port attributes " (page
to change the mode from View to Modify.

Configure storage systems for Continuous Access Journal, define logical paths

for more information.
"Planning the data path" (page 35) for more information.
43).
45