Pairsplit-R Dialog Box - HP StorageWorks P9000 User Manual

Item
Priority
Error Level
M-JNL Information
Set
Cancel

Pairsplit-r dialog box

This dialog box lets you split a pair. See
172 Continuous Access Journal GUI reference
Description
Specify priority (scheduling order) of the initial copy operations (1 256). The default setting is
32.
If the time out error occurs during the Paircreate operation, the copy operation may not be
executed correctly in the order that you have set with the Priority parameter. The time out error
may be caused by the CU configuration or a remote copy path error. Review the error, release
the pair with the error, and then retry the Paircreate operation.
For the details of the scheduling order of the initial copy for which the Priority is set,
set for initial copy operations and scheduling order" (page
Specify the range used for splitting a pair when a failure occurs. The default is Mirror.
Mirror: If a failure occurs with a pair, all pairs in the mirror where the pair belongs are
split.
LU: If a failure occurs with a pair, only the pair are split.
Displays information about the master journal.
Current Mirror(s): Indicates the number of mirrors registered in the master journal.
Total Mirror(s): Indicates the sum of the following:
(1) The number of mirrors registered in the master journal.
(2) The number of mirrors to be added by the Paircreate dialog box.
(3) The number of mirrors for volumes in the Preview list in the Pair Operation window.
Applies the settings to the Preview list in the Pair Operation window.
Discards the settings and closes the dialog box.
"Split a pair " (page 57)
see"Priority
27).
for complete information.