HP StorageWorks P9000 User Manual page 188

Operation Displayed
Status Change by MCU(COPY to PAIR)
Status Change by MCU(COPY to PSUS/PSUE)
Status Change by MCU(PAIR to PSUS/PSUE)
Status Change by MCU(PAIR to SMPL)
Status Change by MCU(COPY to SMPL)
Status Change by MCU(PSUS/PSUE to SMPL)
Status Change by MCU(PSUS/PSUE to COPY)
Status Change by RCU(Pairsplit-r Start)
Status Change by RCU(Pairsplit-r Complete)
Status Change by RCU(PSUS/PSUE to SMPL; Pairsplit-S
Start)
Status Change by RCU(COPY to SMPL; Pairsplit-S Start)
Status Change by RCU(PAIR to SMPL; Pairsplit-S Start)
Status Change by RCU(Pairsplit-S Complete)
Ready for Delta resync
Ready for Delta resync(Failure)
Status Change for Delta resync
Status Change by MCU(SMPL to HOLD)
Status Change by MCU(HOLD to PAIR)
Status Change by MCU(HOLD to COPY)
Status Change by MCU(HOLD to SMPL)
188 Continuous Access Journal GUI reference
Description
The status of the pair was changed from COPY to PAIR
because of an operation from the primary storage system.
The status of the pair was changed from COPY to PSUS
or PSUE because of an operation from the primary storage
system.
The status of the pair was changed from PAIR to PSUS or
PSUE because of an operation from the primary storage
system.
The status of the pair was changed from PAIR to SMPL
because of an operation from the primary storage system.
The status of the pair was changed from COPY to SMPL
because of an operation from the primary storage system.
The status of the pair was changed from PSUS or PSUE to
SMPL because of an operation from the primary storage
system.
The status of the pair was changed from PSUS or PSUE to
COPY because of an operation from the primary storage
system.
The status of the pair was changed because an operation
for splitting a pair started at the secondary storage system.
The status of the pair was changed because an operation
for splitting a pair finished at the secondary storage system.
An operation for releasing a pair has been started at the
secondary storage system. The status of the pair will change
from PSUS or PSUE to SMPL.
An operation for releasing a pair has been started at the
secondary storage system. The status of the pair will change
from COPY to SMPL.
An operation for releasing a pair has been started at the
secondary storage system. The status of the pair will change
from PAIR to SMPL.
The status of the pair was changed because an operation
for releasing a pair finished at the secondary storage
system.
A pair became ready for delta resync.
The failure occurred with the pair which was ready for
delta resync.
The status of the P-VOL was changed to HOLD because of
a delta resync operation.
The status of the pair was changed from SMPL to HOLD
because of an operation from the primary storage system.
The status of the pair was changed from HOLD to PAIR
because of an operation from the primary storage system.
The status of the pair was changed from HOLD to COPY
because of an operation from the primary storage system.
The status of the pair was changed from HOLD to SMPL
because of an operation from the primary storage system.