HP StorageWorks P9000 User Manual page 116

Continuous access journal user guide
Hide thumbs Also See for StorageWorks P9000:
Table of Contents

Advertisement

Table 19 RAID Manager error codes for Continuous Access Journal (continued)
Error code (SSB1)
1 16
Troubleshooting
Error code (SSB2)
Error content
E87B
A request of Cnt Ac-J Paircreate was rejected because the specified journal
was unregistered.
E87C
Journal volume is not registered in the specified journal.
E87D
A request of Cnt Ac-J Pairresync was rejected because the specified volume
was not for the Cnt Ac-J pair.
E87E
A request of Cnt Ac-J Paircreate was rejected because the specified P-VOL
or S-VOL was a journal volume.
E880
A request of Cnt Ac-J Paircreate was rejected because the emulation type
was different between the specified P-VOL or S-VOL and the journal volume.
E881
Cnt Ac-J pair cannot be created or resynchronized because of the power-on
processing.
E882
A request of Cnt Ac-J Paircreate was rejected because the emulation type
of the specified master journal or the restore journal was invalid.
E883
The specified mirror ID number or the CTG number differs from the registered
mirror ID number or the CTG number.
E888
A request of Cnt Ac-J Paircreate was rejected because the specified master
journal was already used for a pair with another restore journal.
E889
A request of Cnt Ac-J Paircreate was rejected because the specified journal
was already used in another Cnt Ac-J's mirror ID.
E890
A request of Cnt Ac-J Paircreate was rejected because the specified volume
was already registered on the journal.
E891
A request of Cnt Ac-J Paircreate was rejected because the number of pairs
that are registered in the specified master journal or restore journal was
already reached the maximum number.
E89A
A request of Cnt Ac-J Paircreate was rejected because the path between
the storage devices for the both-way was not defined. Check whether the
bidirectional normal path was defined or not.
E89B
A request of Cnt Ac-J Paircreate was rejected because the specified master
journal or the restore journal remembered the state of connection with
another system in the past. Specify another journal, or delete the journal
once, then retry the registration again.

Advertisement

Table of Contents
loading

Table of Contents