Pair Volumes; Journal Volumes; Journals - HP StorageWorks P9000 User Manual

MCUs control the primary storage volume (P-VOL) and the following operations:
Host I/O operations to the P-VOL
Master journal operations
Initial copy and update copy operations between the P-VOL and secondary volume (S-VOL).
RCUs control the secondary storage volume (S-VOL) and the following operations:
Issue read-journal commands to the MCU.
Manage the copying of journal data from master to restore journal.
Manage the copying of restore journal data to S-VOL.
Assist in managing pair status and configuration (for example, rejects write I/Os to the S-VOLs).

Pair volumes

Original data is stored in the P-VOL and the remote copy is stored in the S-VOL. The pair can be
paired, split, re-synchronized, and returned to the simplex state. When synchronized, the volumes
are paired; when split, new data sent is to the P-VOL but held from the S-VOL. When
re-synchronized, changed data is copied to the S-VOL. When a disaster occurs, production
operations can be transferred to the S-VOL. When the primary site is functional again, operations
and data can be transferred and copied back to the P-VOL.
The P-VOL remains available to the host for read and write I/O operations. The secondary system
rejects write I/Os for the S-VOL, unless the write-enable option is specified for the S-VOL. Then,
write I/O is allowed to the S-VOL while the pair is split. In this instance, S-VOL and P-VOL track
maps keep track of differential data and use it to re-synchronize the pair.

Journal volumes

Journal volumes are required on the primary and secondary systems.
Updates to the P-VOL are copied to the master journal volume in the primary system. See the
illustration in
Master journal data is copied to the restore journal volume on the secondary system.
Journal volumes can have different volume sizes and different RAID configurations.
Journal data is stored sequentially and separately into each journal volume in the same journal.
For information on planning journal volumes, see
NOTE: If a path is defined from a host to a volume, you cannot register the volume as a journal
volume.

Journals

Journals help you manage data consistency between multiple P-VOLs and S-VOLs. A journal consists
of two or more data volumes and journal volumes.
You use journals to create multiple pairs and to split, resync, and release multiple pairs. Journals
are required on the primary and secondary systems.
Each data volume and its associated journal volume reside in the same journal. This is illustrated
below.
The master journal contains master journal volumes and is associated with the P-VOL.
The restore journal contains restore journal volumes and is associated with the S-VOL.
Each pair relationship between journals is called a "Mirror". A Mirror ID identifies a pair relationship
between journals. When the pair is created, it is assigned a mirror ID.
"Journals" (page 11).
"Sizing journal volumes " (page 22)
Hardware and software components
.
1 1