Configure Additional Logical Paths - HP StorageWorks P9000 User Manual

1 1. The Minimum Paths box is intended for a future release. Continue to the next step.
12. RIO MIH means "Remote I/O Missing Interrupt Handler".
In the RIO MIH Time box, enter the amount of time from 10 seconds to 100 seconds (15
seconds is the default).
13. Click Set.
14. See the Preview list to check the settings that you have made.
If you want to modify a setting, select and right click the item in the Preview list and then
select Modify.
If you want to cancel a setting, select and right click the item and then select Cancel.
15. Click Apply to apply the settings. If an error occurs, the error code appears in the rightmost
column of the Preview list. To view detailed information about the error, right click the error
code and select Error Detail.

Configure additional logical paths

You can configure additional logical paths as needed. A maximum of eight logical paths are
supported.
Prerequisite information
Please review the prerequisites for configuring logical paths in
Continuous Access Journal, define logical paths " (page
To configure additional logical paths
1. In Remote Web Console, select Actions > Remote Copy > Continuous Access Journal > DKC
Operation.
2. Click
3. In the Display box, select DKC. The tree and full list on the right-side display information about
remote storage systems.
4. In the tree, select the remote system. The logical paths display in the full right-side list.
5. Right-click a logical path and select Add Path from the menu.
to change the mode from View to Modify.
"Configure storage systems for
45).
Configure additional logical paths 47