Lt And Aux Menus; Lj4 Menu - Epson EPL-N2000 User Manual

LT and AUX Menus

The LT menu appears only when you have installed the
LocalTalk/Serial module (described in Chapter 4) and have set
the Emulation menu to LT ( see page 3-10). The AUX menu is
available only when you have installed a Type B interface.
Both menus have one menu item, Buffer Size, that sets the
memory allocation used for the optional interface. You can set it
to Maximum (more memory allocated for receiving data),
Minimum (more memory allocated for printing data), or Normal
(for balanced usage); Normal is the default.

LJ4 Menu

The LJ4 menu settings control the available fonts and symbol
sets when you use the LJ4 (PCL5e) emulation mode. You should
change the font and symbol sets using your software, not using
SelecType, because your software settings override SelecType
settings.
LJ4 menu items
Menu item
FontSource
Font Number
Pitch
Height
SymSet *
3-18 Using the Control Panel
Description
Selects the default font source to Resident, SIMM,
Card, or Download.
Sets the default font number for the selected font
source, 0 through 65535.
Specifies the font pitch if the default font is scalable
and fixed-pitch. Settings are from 0.44 to 99.99 cpi
(characters per inch) in 0.01 cpi increments; 10.00 is
the default.
Specifies the default font height if the font is scalable
and proportional. Settings are from 4.0 to 999.75 points
in 0.25 point increments.
Selects the symbol set to be used by the default font;
Roman-8 is the default (see the Technical Information
manual for details on the available symbol sets).