Installing The Rubber Cushions; Installing The Oil Pan; Installing The Cushions - Brother KE-484C Instruction Manual

3. INSTALLATION

3-3. Installing the rubber cushions

3-4. Installing the oil pan

3-5. Installing the cushions

5
Install the rubber cushions (1) with the nails (2).
* Install so that the head of the nail does not protrude from the
rubber surface
2489Q
1. Insert the tabs of the oil pan (2) into the holes for the
2490Q
cushions (1), and then secure it in place with the five nails
(3) so that the oil pan (2) is not at an angle.
2. While pushing the oil pan (2) down from above, screw in the
oil container (4).
2491Q
Place the two cushions (1) into the holes in the work table so
that the notches are aligned with the tabs in the oil pan, and
secure them in place with the nails (2).
2492Q
KE-484C