3. Installation
3-5. Installing the oil pan
3-6. Installing the cushions
10
1. Insert the tabs of the oil pan w into the holes for the
cushions q, and then secure it in place with the five
nails e so that the oil pan w is not at an angle.
2. While pushing the oil pan w down from above, screw
in the oil container r.
1. Place the washers q and cushions w into the two
holes in the work table.
e
* Adjust the height of the machine head to the button
feeder by the number of the washers q.
2. After the height is decided, secure them with the nails
e.
w
q
LK3-B448E MARK
/BA-16
II