Using The Cycle Sewing Function - Brother KE-484C Instruction Manual

13-1. Using the cycle sewing function

What is the cycle sewing function?
The cycle sewing function lets you program up to four patterns for cycle sewing of patterns in a predeter mined order.
Recording a cycle sewing program
1. Set DIP switch (1)-3 to ON, and then record the
patterns which you would like to use for cycle
sewing. (Refer to "12-3. Using user programs".)
* Cycle sewing cannot be performed using patterns (P1 to P16)
which have not had a user program assigned.
2. Set the memo-03 switch to ON. (Refer to page 55 for
how to do this.)
3. While pressing the TEST switch (2), press the
SELECT switch (3).
* All of the menu indicators ((4) to (8)) will illuminate and the
mode will switch to recording mode.
4. Press the P1 switch (9).
• "Pc 1" will appear in the display window (10) to
indicate that cycle sewing program No. 1 is being
recorded.
* Programs P2, P3 and P4 switches can also be used for
programming.
5. Press the SELECT switch (3).
6. Press the DISPLAY SET switches (11) to select the number for the user program that you would like to record.
7. Press the SELECT switch (3).
8. Press the DISPLAY SET switches (11) to select the number for the user program that you would like to record.
9. Repeat steps 5. and 6. to record all programs which you would like to include for cycle sewing.
* After "9- -" is displayed, "A- -", "b- -", "c- -", "d- -", "E- -" and "F- -" will be displayed in that order so that up to the 15th pattern can be
recorded.
* If you would like to return to a previous number during the recording procedure, press the P1 switch so that "Pc 1" is displayed, and
then return to step 4.
10. Press the TEST switch (2).
• This completes the setting of cycle sewing program No. 1.
* The menu indicators ((4) to (8)) will all illuminate and "c1-1" will appear in the display window (10) to indicate that the cycle sewing
program No.1 is currently selected.
13. CHANGING SPECIAL FUNCTIONS USING THE MEMORY SWITCHES
*The PROGRAM No. indicator (4) will illuminate and "1- -" will appear in the display window (10).
*"2- -" will appear in the display window (10).
KE-484C
2589Q
2591Q
52