Installing The Rubber Cushions; Installing The Oil Pan; Installing The Cushions - Brother LK3-B438E MKII Instruction Manual

3. INSTALLATION

3-5. Installing the rubber cushions

w
q

3-6 . Installing the oil pan

r

3-7 . Installing the cushions

9
Install the rubber cushions q with the nails w.
1. Insert the tabs of the oil pan w into the holes for
q
2. While pushing the oil pan w down from above,
w
e
Place the two cushions q into the holes in the work
w
table so that the notches are aligned with the tabs in
the oil pan, and secure them in place with the nails w.
q
LK3-B438E Mark II
the cushions q, and then secure it in place with
the five nails e so that the oil pan w is not at an
angle.
screw in the oil container r.