Brother KE-484C Instruction Manual page 35

7. CORRECT USE
7-5-5. Thread take-up spring tension
7-5-6. Adjusting arm thread guide R
Become greater
7-5-7. Thread take-up amount
29
Stronger
Weaker
Become less
Turn the tension stud (1) with a screwdriver.
3188Q
The standard position of arm thread guide R (1) is the posi-
tion where the screw (2) is in the center of the adjustable
range for arm thread guide R (1).
To adjust the position, loosen the screw (2) and then move
arm thread guide R (1).
* When sewing thick material, move arm thread guide R (1)
to the left. (The thread take-up amount will become
greater.)
* When sewing thin material, move arm thread guide R (1)
to the right. (The thread take-up amount will become
less.)
3189Q
Loosen the nut (1) and move the stopper (bolt) (2) to adjust
the protruding position of the cylinder (3).
* To reduce the thread take-up amount, tighten the stopper
(2).
* To increase the thread take-up amount, loosen the
stopper (2).
3190Q
KE-484C