Cautions On Power Supply - Epson TM-J7200 Technical Reference Manual

Cautions on Power Supply

WARNING
CAUTION
4
 Be sure to use the specified AC adapter. Connection to an improper power source may
cause fire. (See "Product Specifications" on page
 Do not allow dust or foreign materials to adhere to the power plug. Accumulated dust or
foreign material may cause electric shock or fire.
 Insert the power plug securely into the socket. Failure to insert the plug securely may
cause electric shock or fire.
 For the power cable, use either the included one or a designated one that meets the rele-
vant safety standards of the area where you plan to use it.
 Do not use it for any device other than the designated device.
 Do not use a damaged power cable. Doing so may cause electric shock or fire.
Contact qualified service personnel for advice if the power cable is damaged. Observe the
following points so as not to damage the power cable:
 Do not modify the power cable.
 Do not place heavy objects on the power cable.
 Do not forcibly bend, twist or pull the power cable.
 Do not locate the power plug near a heating device.
 Do not hold the power plug with a wet hand. Doing so may cause electric shock.
 Do not connect too many power cables to one outlet. Doing so may cause fire.
 Disconnect the power plug from the outlet on a periodical basis, and clean the areas
around and between the blades. Leaving the power plug connected to the outlet for a long
period of time may cause dust to accumulate on the blade root, resulting in a short-circuit
or fire.
 Hold the plug and do not pull the cable when disconnecting the power plug from the out-
let. Pulling the cable may damage the cable or deform the plug, causing electric shock or
fire.
 To ensure safety, unplug this product before leaving it unused for an extended period.
95.)