Remote Control - Digimerge Touch DH200 Series Instruction Manual

REMOTE CONTROL

1. LED Indicator: Flashes red with every button-press.
2. POWER: Press to power the system ON/OFF
(password required).
3. Navigation/Menu:
• : Press to move cursor up
• : Press to move cursor down
• : Press to move cursor left
• : Press to move cursor right
• MENU: Press to open the Main Menu
: P
4. ress to switch between single channel
full-screen, quad, and split-screen displays.
: P
5. ress to confirm menu options/selections.
6. Playback controls:
• : Press to increase reverse playback speed 1X,
2X, 4X, 8X, and 16X.
• : Press to begin playback; press to switch
between forward and reverse playback
• : Press to increase forward playback speed 1X,
2X, 4X, 8X, and 16X
• :
During playback, press to pause; press
repeatedly for frame-by-frame playback; during
live viewing, press to open the PTZ menu
• : Press to stop playback
• :
During playback, press to pause; press
repeatedly for frame-by-frame playback; during
live viewing, press to Spot Out.
7. Channel buttons: Press to view channels 1~8
individually in full-screen; press to input passwords;
when entering camera titles, press for
alpha-numeric characters.
:
8. Press to open the Time Search menu.
9. CANCEL/ESC: Press to close menu windows; press
to show/hide the on-screen display (OSD); press to
clear channel indicators (loss, alarm, etc.).
+
10. : Press to increase values in menu options.
-
11. : Press to decrease menu options in menu options.
12. : Press to start/stop manual recording.
6
1
2
3
4
5
6
7
8
You can use the channel buttons on the remote
control to enter numbers, letters, and other
characters.
9
10
11
12