External Usb Hdd; Usb Cd/Dvd-Rw - Digimerge Touch DH200 Series Instruction Manual

External USB HDD

ATTENTION: You must STOP ALL RECORDING on the system prior to backing up any video data to an
external USB HDD or external USB CD/DVD-RW drive.
To backup recorded video:
1. Connect an external USB HDD to the USB port on the
front panel.
2. Format the external USB HDD if you have not already
done so. For details on formatting the external USB
HDD, see "DISK" on page 30.
3. Press the
BACKUP
4. Under DEVICE, make sure to select
5. Under SELECT, select specific cameras or select ALL.
Select ,
NORMAL ALARM
boxes if desired.
6. Under RANGE, enter date and time for the system to scan for video. If the system finds a file,
it will immediately begin backing up the data. Monitor the backup progress in the ACTION
frame.
If there is no video available in the range, the system will prompt, "STATUS: NO FILE."
NOTE:
7. Under ACTION, select
8. Once backup is complete, press
9. You will be prompted to re-start recording on the system. Press
prompt, and
/
Recording.

USB CD/DVD-RW

To backup recorded video:
1. Connect an external USB CD/DVD-RW drive to the USB
port on the front panel.
2. Insert a CD/DVD-R/W disc into the drive.
3. Press the
BACKUP
4. Under DEVICE, make sure to select
5. Under RANGE, enter date and time for the system to
scan for video. If the system finds a file, it will
immediately begin backing up the data. Monitor the
backup progress in the ACTION frame.
If there is no video available in the range, the
NOTE:
system will prompt, "STATUS: NO FILE."
button on the front panel.
USB HDD
, or recording. Select all
MOTION
and press
START ENTER
CANCEL/ESC
to resume Continuous Recording; press
button on the front panel.
USB - CD/DVD-RW
.
Figure 20.1 Backup menu—USB HDD
.
to close remaining windows.
CANCEL/ESC
/
.
Figure 20.2 Backup menu—USB CD/DVD-RW
Backup
to close the
to resume Schedule
33