Adding A Dvr; Editing A Dvr; Deleting A Dvr - Digimerge Touch DH200 Series Instruction Manual

H.264 digital video recorder with touch sensitive control
Hide thumbs Also See for Touch DH200 Series:
Table of Contents

Advertisement

Using DVR NetView

Adding a DVR

To add a DVR:
1. From the main screen, click
2. Click
. Any DVRs connected to the local network will appear in the list frame.
Auto Scan
Figure 22.1 DVR auto-detected by the Set List Manager
3. If your DVR does not appear after Auto Scan, you can add it manually to the list:
• SET NAME: enter a title for the DVR (e.g. DVR1)
• IP/DDNS: enter the IP address of the DVR or DDNS domain name, followed by .digimerge.net
(i.e. tomsmith1.digimerge.net)
• PORT: 7000 (default)
• PASSWORD: Enter the system password (by default, 000000)
• Click ADD TO LIST to save the DVR
4. Click PROPERTY to view the properties of your DVR.
5. Click OK to save your settings or click CANCEL to exit without saving.
You will automatically log in to this DVR when you launch DVR NetView.

Editing a DVR

To edit a DVR:
1. Select a DVR from the list frame.
2. Change the Set name, IP address, port, or password and click APPLY.
3. Click OK to save your settings.

Deleting a DVR

To delete a DVR:
1. Select a DVR from the list frame.
2. Click DEL FROM LIST.
3. Click OK to save your changes.
40
. The Set List Manager window opens.
NOTE: From the Set List Manager
window you can also perform a
Remote Setup of your system. For
details, see "Remote Setup" on
page 59.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Touch dh200p series

Table of Contents