Stopping Scheduled Recording; Overnight Recording; Example - Digimerge Touch DH200 Series Instruction Manual

H.264 digital video recorder with touch sensitive control
Hide thumbs Also See for Touch DH200 Series:
Table of Contents

Advertisement

Using the Main Menu
5. Press the
button to save your
ENTER
settings. The Schedule sub-menu closes.
The assigned mode appears in the main
Schedule window.
6. Press
CANCEL/ESC
menu windows.
7. To enable the recording schedule, press
on the front panel or
/
Virtual Remote.
Figure 17.1 Schedule recording

Stopping Scheduled Recording

If you need to stop a recording schedule, press
on the front panel or
/
Remote and enter your 6-digit system
password (by default, 000000).
Always look for the
NOTE:
status bar. If you do not see the
schedule recording is NOT ENABLED.

Overnight Recording

If you want to program an overnight recording
schedule, you will need to split the time using
the available time slots in the Schedule
sub-menu.

Example

You are a small business owner that wants
your custom recording schedule to record
from 9 PM to 8 AM, Monday to Friday.
To set the schedule:
1. From the Schedule menu, select
26
to close remaining
on the
on the Virtual
icon in the
icon,
MODE1~4
Figure 17.2 Split the overnight recording time
2. Customize the
motion detection
For this example, Mode 1 will have
cameras 1 and 2 set to ULTRA and 15 fps,
while the remaining cameras will be set to
HIGH and 7 fps.
3. Select the
CHART
then press the
Schedule sub-menu opens.
4. Under BEGIN, press the
the front panel or remote control to enter
. Under END, enter
21:00
NOTE: If using the front panel, you can select
digits by pressing + / -. You need to press + / -
to select 0.
5. Under MODE, select
6. Press
to move the cursor to BEGIN in
the right-hand column. Enter
END, enter
08:00
7. Under MODE, select
8. Press the
ENTER
settings and return to the main Schedule
menu. Mode 1 (red) will appear in the
designated time block in the schedule.
9. Repeat steps 1~8 for Tuesday~Friday.
10. Press
on the front panel or
/
the Virtual Remote to enable scheduled
recording.
.
,
video quality
frame rate
for the desired channels.
tab and select
MON
button. The
ENTER
number buttons
.
23:59
.
MODE1
. Under
00:00
.
.
MODE1
button to save your
, and
and
on
on

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Touch dh200p series

Table of Contents