Zoom; Sequential Setup (Auto Sequence) - Digimerge Touch DH200 Series Instruction Manual

Zoom

Use the system's built-in 2X digital zoom to get a closer look at images in full-screen (full-screen
mode only).
To use zoom:
1. From live viewing, press the number buttons on the front panel or remote control to select a
channel to view in full-screen.
The zoom function will not work if the main display screen is in quad or split-screen
NOTE:
configurations.
2. Press the ENTER button. The OSD disappears. A black frame appears in the center of the
screen.
Figure 7.0 Zoom frame (full-screen only)
3. Once the frame is visible, perform any of the following:
• Press to move the frame anywhere on the screen
• Press the ENTER button to zoom in 1X
+
• Press to zoom in 2X; press
• Press to scan the image
4. Press the
CANCEL/ESC

Sequential Setup (Auto Sequence)

Sequential Setup (Auto Sequence) allows you to view connected cameras in an automatic
sequence. Sequential Setup can include both full-screen and split screen modes.
For more details on Sequential Setup, see see "Sequential Setup" on page 22.
-
to zoom out 1X
button to exit zoom and return to live viewing.
Using the System
:
OPTIONAL
Once the frame is visible,
you can also perform the
following:
+ / -
• Press to shrink the
frame
• Press the ENTER button
to zoom in 2X
15