Replacing The Power Supply - Gateway E1400 System Manual

Replacing the power supply

Observe the following instructions for removing the power supply and
installing a new one. Your power supply can be removed without
disconnecting power supply cables or removing screws.
To replace the power supply:
1
Turn off the computer, disconnect the power cord, modem cord (if
installed), and all external peripheral devices.
2
Remove the right panel. (See "Removing the side panels" on page 19 and
observe the "Static electricity precautions" on page 17.)
3
Pull the power supply release lever away from the chassis. This releases
the power supply from its connector and moves it out from the back of
the chassis.
Power supply
release lever
4
From the rear side of the chassis, pull the power supply out and away
from the chassis.
54
System Components
Power
supply