Updating The Bios - Gateway E1400 System Manual

Updating the BIOS

If you need a new version of the BIOS, you can download the BIOS update
from technical support on the Gateway Web site (www.gateway.com) and
install the new version from a diskette.
To update the BIOS you need to perform the following tasks in sequence:
Create a bootable diskette


Note the current BIOS settings


Create the BIOS update diskette


Update the BIOS


Restore the BIOS settings


To create a bootable diskette:
1
Enter DOS and type the following at the DOS prompt: format a: /s
1
Put a blank diskette in the diskette drive, then press
2
Follow the instructions on the screen.
To note the current BIOS settings:
1
Remove the bootable diskette and restart your computer.
2
Enter BIOS Setup by pressing F1 when prompted during startup.
3
Write down the settings for each of the fields. (At the end of the BIOS
update process, you will reset the fields back to the values you recorded.)
4
Exit the BIOS Setup utility.
To create the BIOS update diskette:
1
Log on to the Internet.
2
Download the correct BIOS file from the technical support area of
www.gateway.com.
3
Decompress the contents of the BIOS file you downloaded and copy the
contents onto the bootable diskette.
.
E
NTER
Updating the BIOS
67